How to make a paper trucker cyclist
A very fun game and one that is not very difficult to perform is the truist cyclist . In addition, the materials you need are sure you have them at home and if you had to go to buy the price is not very high. To make it work you have to balance the cyclist on a long piece of string. Tilt the rope down so that the wheel turns well. Look at the following article, how to make a truist cyclist.
You will need to:- A piece of cardboard about 30 cm long by 15 cm wide
- A cardboard tube
- A drinking straw
- A hairpin
- A sheet of paper
- Platyne
- A pencil
- Glue and scissors
one
Draw a thin man on the cardboard, about 30 cm high. Make the legs twice as long as the body. Cut out the shape leaving a wide space between the legs, as in the drawing.
two
Then put the end of the cardboard tube on another cardboard and draw two circles . Cut them 1 cm wider than the lines drawn.
3
Next, cut a band 1 cm wide from the end of the cardboard tube (a). Glue a circle on each side of the band to form the wheel (b).
4
Straighten the hairpin and push it through the center of the wheel. Stick it there. Put a short piece of straw through the fork on each side of the wheel.
5
Put the wheel between the cardboard man's legs, leaving a hole in the top. Make sure the wheel turns easily. Glue the two pieces of straw to the legs.
6
Pass the man's legs over the straws and fold them. At the height of the hips, fold the doll so that it looks like it is sitting. Cut out two small circles of paper . Glue one on each side of the fork.
7
To finish cut out a circle of paper and glue it to a piece of the straw . Glue the other end of the straw to the man's hand. Put two small gobs of plasticine at the end of the cardboard man's legs.
