How to extend wifi coverage

Wi-Fi brings us many joys, but also many headaches. One of the most common is that of your coverage in our own home: why are there rooms that do not arrive well? Why are there places where we hardly have Wi-Fi coverage ? Is it the fault of the Internet provider or have we done something wrong? Many times it is the simple placement of the router in an unfortunate place or the layout of our house. The good news? It has a solution and in this article of .com we show it to you so you know how to extend the wifi coverage .

Steps to follow:

one

The first thing you should do is check that you have the router in the optimal place in the house. Ideally, place it in the most focused place possible, so that your signal is equally distributed in all corners. Of course, if you usually use the internet in a specific place and the rest of your house does not care, put the router there or, if it is not possible, direct the antenna there.

two

In addition to the place inside the house, it also matters the height at which it is located. Avoid the floor or put it in a closet. It is best to place the router on a tall piece of furniture, away from obstacles. The antennas, in addition, must always be at an angle of 90 degrees with respect to the ground, unless you are interested in directing the signal to a certain point.

3

Is there interference? It is very common to have a phone near the router for practical reasons (this is where the plugs are for the line), but if it is a cordless phone, it could be the reason for all your problems, since they create a lot of interference. Put it as far as possible. In addition, a microwave on or devices with activated bluetooth can also cause interference that shorten your Wi-Fi coverage .

4

If you already have the router in the right place and you have made sure that nothing is causing interference, you can also try to adjust its emission power. In the configuration of the router (see instructions how to access), look for an option similar to " Transmit power " or "Power emission" and make sure it is 100%.

5

If you always have a computer that connects via wifi in the same place in your house, you can build a signal router. Wifi antennas are omnidirectional, so if you always access the internet from the same place part of the signal that goes to other sides is wasted. Build with cardboard, aluminum or a can of soda cut a kind of candle that directs the signal to a specific place.