How to make the game of the firm hand

A fun and entertaining game is what we present below. What you have to do is try to pass the loop over the wire without turning on the bulb. The more curves you make in the wire, the harder the game will be. Look at the following article of a.How, how to make the game firm hand.

• A bulb holder and a 3.5 volt bulb
• 3 pieces of cables about 15 cm long with bare tips
• A 4.5 volt battery
• 2 pieces of florist wire about 40 cm long and the other about 15 cm
• A cardboard box with lid
• Adhesive tape and scissors

one

First bend the small piece of wire to make a loop at the tip. Make curves on the other piece of wire as seen in the drawing, but leave a free path for the loop.

two

Then put the curved wire through the loop. Make two small holes in the lid of the box and put the ends of the curved wires inside them.

3

Then screw the tip of a piece of wire around the tip of a curved wire. Fold the tips back and tape them to the lid .

4

Next, roll the tips of two new pieces of cable around the two pins in the bulb holder.

5

Drill a hole in the lid of the box large enough for a bulb. Push the bulb from the inside and stick the bulb holder to the lid with tape.

6

Then make a small hole in the lid of the box and put the tip of a cable from the bulb holder there. Attach the free end of the other cable to a battery terminal. Connect the curved wire cable to the second terminal of the battery.

7

To finish put the battery inside the box and put all the cables as well. Put the lid on top of the box. Screw the tip of the wire that has the loop around the cable that comes out through the hole in the lid of the box. The game is now ready!