Which subwoofers to choose for the car

A lot of people with audio systems in their cars lack quality in bass, but factory stereo systems do not usually include subwoofers, these speakers produce excellent bass. This is how you should choose the right subwoofers for your car .

• Car cabinet for Subwoofer
• Car Stereo
• Car subwoofers

one

Before buying the car subwoofers . Think about the kind of music you like to listen to, the lower your music is, the bigger the subwoofers you will need.

two

Decide where you will place the subwoofers, commonly the subwoofers are located in a drawer in the trunk, but using special drawers you can place them under the seats or on the side panels. Mainly this will depend on the amount of space you have, often smaller cars can not afford to sacrifice a lot of space for good sound quality.

3

Decide exactly how much you are willing to spend, it will cost at least € 300 and it is best to set a price limit before going shopping.

4

Selection of subwoofers Go to a store that sells subwoofers or surf the internet, you will also have to buy an amplifier to power the subwoofers .

5

Decide if you want a subwoofer or two, this depends mainly on your musical preference, but can be affected by the available space of your car . Only one is good for those who listen to classical music, rock or country, while two are more suitable for those who listen to rap, R & B, or techno.

6

Decide the size you want for the subwoofers, the most common sizes are 8 inches, 10 inches, 12 inches and 15 inches, the bigger the subwoofer, the lower the frequency it will produce (which is important above all for techno) .

7

Decide on what type of cabinet drawer subwoofers, although this can be dictated by the speakers you have chosen.

8

Consider the sensitivity, the sensitivity is the amount of sound you can get from the amount of power you have given the speaker, the higher is better.

9

Consider the maximum RMS wattage, the RMS power is the amount of power that the subwoofer can handle. In general, the more power they can handle, the greater the sound they can produce, but they will also be more expensive, especially since you will have to buy an amplifier that can produce more power.

10

Consider the cone, the options include kevlar, polypropylene, aluminum, or a cone of carbon fiber, being better according to the listed order, what you will not want is a paper cone.

eleven

Consider environments, rubber ones are better, foam ones are fine, but do not buy a urethane subwoofer . The cones and the environments not only affect the quality of the sound that the subwoofer will produce, but also its duration.

12

Choose the one that best fits the guide described above. The lowest price of support and good brand may be MTX, and Infinity and Polk dominate the high-end market.

13

Choose an amplifier to power your new subwoofers, you will want something that resembles the production of RMS power equal to the maximum RMS capacity of your subwoofers without falling below that rating. Apart from that, the total harmonic distortion (THD) is the most important classification of the amplifiers, the THD are expressed as a percentage, and you want the lowest possible number.

• You may want to choose a couple of possible places to put your new subwoofers and measure them before going shopping.
• Instructions on how to install subwoofer can be found right here at .com