How to make a flashlight

There are many types of flashlights . The one that we teach you here to do is different from the classic flashlight and has a simple circuit. It is much more original and beautiful. You can also decorate it with different colors, midas and shapes, as you like. To make the flashlight it would be good to look at the articles on how to make a bulb holder and a switch. Look at the following article, how to make a flashlight.

• A small small cardboard box
• A bulb holder and a 3.5 volt bulb
• A switch
• A 4.5 volt battery
• 2 pieces of cables 50 cm long with bare ends
• A piece of cables 10 cm long with bare tips
• A stick 30 cm long
• Colorful cellophane
• Scotch tape
• Glue and scissors

one

First cut a square hole on each side of the box. Make a hole in the lid large enough so that two wires can go through it. Glue cellophane on the sides of the box.

two

Then connect one end of each long cable to a pin in the bulb holder. Insert the cable through the hole in the lid. Attach the bulb holder to the lid with tape.

3

Then lower the lid and seal it with tape . Put the cord on the end of the stick and fasten it with tape. Tape the cable to the stick on the other side.

4

Then attach one end of a stick cable to a battery terminal . Join the other wire to a pin on the switch.

5

Wind one end of a new cable around the free pin on the switch. Join the other end to the second terminal of the battery . Now turn on the flashlight.