How to get the best finish on wood

There are certain things you must do to protect the wooden surfaces in your home. A nice, even finish coat will make any piece of wood look better . However, the finish is also important for the protection of a wooden element from damage, such as sun exposure and moisture problems. To obtain the best wood finish, it is necessary to use only the right strategies. Otherwise, the wood will not have the appearance you want, and it will not be adequately protected.

You will need to:

Sandpaper
Vacuum cleaner
Clear conditioner
Brushes
Wood finishing
Cloth

Steps to follow:

one

Sand the surface of the wood with rough sandpaper at first and then move on to finer grains of sandpaper. The finer the sandpaper, the softer the surface of the wood will be. To get the best result, you should stop sanding when you achieve a surface that looks like glass in the wood.

two

Clean accumulated dust during the sanding process. Use a vacuum cleaner and then use a cloth to clean all sanding dust.

3

Apply a sealer to the wood with a brush before applying the wood finish. The sealer helps seal the wood beyond damage and lets the true color of the finish come out.

4

Brush the finish of the wood with a brush. This must be done within two hours after applying the clear conditioner.

5

Wait approximately half a minute. Then, clean the finish with a clean cloth. Working in very small areas of around 20 square centimeters will help you get the best wood finish.

6

Allow the first coat of finish to be dry to the touch. Then you can apply the second hand using the same techniques. A third layer may be necessary to obtain the richness of the color you want in the wood.

Tips