How to clean the exhaust pipe of the motorbike

Knowing how to clean the exhaust pipe of the motorcycle will allow this piece to be in an optimal state so that it does not lose power to the vehicle. Thus, when the exhaust pipe already accumulates too much waste, the performance of the bike is lower and unwanted noise can occur. To help you in this task of maintenance of your vehicle, in .com we explain how to clean the exhaust pipe of the motorcycle .

You will need to:
  • Ventilated place, large bucket, caustic soda, water, gloves, goggles, mask.
Steps to follow:

one

When performing the operation of cleaning the exhaust pipe of the motorcycle we will be able to remove the excess of carbon and soot that accumulates as a result of the operation of the engine and we will avoid that these debris cause a drop in the performance of the vehicle.

two

The solution we propose to clean this piece is to remove the exhaust and use a mixture of caustic soda and water to clean the interior and get rid of accumulated char.

3

You will use an abrasive and toxic chemical, so you will have to protect your body and hands, with gloves. You should also use glasses to protect the eyes and a mask to avoid breathing the toxic. Perform the cleaning operation of the exhaust pipe of the motorcycle in an airy place.

4

Before proceeding with cleaning the tube, you will have to disassemble it . If you do not know how to do it, it is convenient that you read this article we explain how to disassemble the exhaust pipe of the motorcycle. The operation will be more or less complicated depending on the model and it is convenient that you consult the manual of your vehicle before starting.

5

Once you have the tube removed, you must do the operation in a large bucket that fits the tube and in a well-ventilated place to avoid poisoning. We remind you of the importance of protecting your eyes, respiratory tract and hands. You must cover one end of the tube, so that the caustic soda remains inside, and on the other end, introduce the product, approximately one kilo.

6

To continue with the cleaning of the exhaust pipe, move the latter to get the caustic soda to expand throughout the interior. Next, pour 2 liters of boiling water into the interior of the exhaust pipe, taking great care to avoid being caught by the product. Then, in a large bucket with water submerge the exhaust pipe and leave it there for about 24 hours.

7

After this time, to clean the exhaust pipe of the motorcycle, remove the water mixed with the caustic soda and remove it to be recycled to a clean point. The exhaust pipe rinse well with a hose, let it dry and replace it. Now you will have your exhaust in optimal conditions so that you will not detract from your vehicle.