How to clean the motor of my motorcycle
The cleaning of the engine of the motorcycle is a task that we must carry out not only for aesthetic reasons, but, above all, because an excess of dirt could end up preventing an optimal functioning of the machine. In this article, we explain how to wash the motorcycle, but before getting down to work, since we are going to use water, it is necessary that we completely isolate all the electronic components. In .com we answer the question of how to clean my motorcycle engine .
You will need to:- plastic, adhesive tape, degreasing liquid, brush, hose, water pressure, cloth.
one
Before starting to clean the motorcycle engine, we should let it cool down. Some kinds of motorcycles already have the motor to the air, but in other models we will need to remove the fairings before.
two
Once we have access to the engine and it is cold, it is when we have to be very careful to cover the electronic components with plastic . Once these areas are covered, we will use adhesive tape to reinforce the coverage before starting to wash.
3
Then comes the time to spray the rest of the motorcycle with a degreasing product. We will let it act for about five minutes and, afterwards, we will rub the areas with the most dirt with a small brush.
4
When we have removed all the waste, we will use a hose to rinse. However, if we see that the engine is not clean at all, we can use water pressure to help clean the engine of the motorcycle .
5
It is very important that, before using our motorcycle after washing the engine, let it dry completely. We can help a rag to remove excess moisture.