How to disassemble the exhaust pipe of the motorcycle

Disassembling the exhaust pipe of the motorcycle is something that you will have to carry out in cases such as when you want to change it, check if it has a crack or breakage or perform other types of checks. For example, it is useful to know how to perform the operation in the event that your motorcycle emits a lot of smoke. If you have skill, you can do it yourself without having to resort to a mechanic. In .com we explain step by step how to disassemble the exhaust pipe of the motorcycle.

one

The explanation of how to disassemble the exhaust pipe of the motorcycle we will do for a motor scooter type. The first thing we have to do is remove the lid that is under the seat, on the side of the exhaust. We will need to remove the screws and then pull the plastic cover outwards with our hands.

two

Having removed the lid, we have access to the exhaust system of the bike we want to dismantle . We begin to remove the screws. We recommend that you review the manual of your motorcycle to locate all these hooks.

3

In the case of a motorcycle with electronic injection, to disassemble the exhaust pipe, you will also need to remove the so-called lambda probe, which is a piece that is responsible for regulating the harmful gases produced by the motorcycle.

4

Make sure you are working with the ignition of the motorcycle off, otherwise you should reprogram the lambda probe after disconnecting it from the system. So, this probe has an electrical connection, which you must disconnect. For this, you have to remove the cover that protects it, removing the screws. Once you have access to the probe, follow the path of the cable that you have until you reach the connector, which you must remove from its hook. Now, you can disassemble the lambda probe. Check the manual of your motorcycle if you are not sure where it is located.

5

Now, you can dismantle the exhaust of your motorcycle . To do this, hold it tight and pull it hard out. If you see that you are not capable, you may have left some screws without removing. Check this point and pull the exhaust again, which should come out without too much effort.

6

Now, you have the exhaust of your motorcycle disassembled . If you consider that you do not have enough dexterity to do the operation, go to a mechanic to avoid major problems that can cost you dearly.