How to stop a car without brakes

One of the worst situations that we can find when driving a car, is that the brakes do not respond. Although it is difficult for this to happen, it is necessary to know what to do in this scenario to prevent further damage, so in .com we explain how to stop a car without brakes .

one

Obviously, when we run out of brakes, the first thing we have to do is stop pressing the accelerator of our car .

two

What we should never do is turn off the engine, because in this way the only thing we will achieve is to lose control of the vehicle completely .

3

We must remove the gear and put the car in neutral, then with great force, pull the handbrake .

4

If this way we can not stop the car, we should try to put some gear. The most likely thing is that the lower ones do not enter, so we must start with a high and move on to the next lower one, so that the motor brake stops the vehicle little by little.

5

In the event that we are lucky that there is a sandy area next to the road we are traveling, we must direct the vehicle towards it, since this surface will cause our car to stop .

6

If we drive on a steep and winding road, it is likely that braking zones will have been fitted on the sides, which are initially intended for trucks, but which we can also use if we see ourselves in the circumstance that we are staying without brakes .

7

If we do not drive at too much speed, turning the steering wheel to the right and left repetitively, due to the friction that occurs, will reduce the strength of the car .