How to charge a motorcycle's battery

The battery of the motorcycle can get to download because it is damaged or due to external circumstances such as being long stop at very low temperatures. In this case, it's time to charge the motorcycle's battery . You can do it yourself, but it is an operation that involves your risks so you have to be very cautious during the operation. In .com we explain in detail how to charge the battery of a motorcycle.

You will need to:
  • Screwdriver, motorcycle battery charger.
Steps to follow:

one

Before starting to charge the battery of your motorcycle, you must disconnect the terminals: first of the negative and after the positive.

two

If it is a battery that requires maintenance, you will have to remove the plugs. Otherwise, it is not necessary to open the plugs.

3

Afterwards, you can now proceed to connect the cables of the charger, which should not yet be connected to the network. The red wire goes in the positive and the black wire in the negative.

4

Then connect the battery charger of the motorcycle to the network.

5

Regarding the intensity of the load, calculate that you never exceed one tenth of the total capacity of the battery, so you should be clear about this information. The process can last about 4 hours or more.

6

Once the motorcycle battery is charged, remove the charger. When you reconnect the battery terminals, do so in the following order: first the positive pole and then the negative pole.