How to change a motorcycle tire

Changing the wheel of a motorcycle is much simpler than that of a car, because of the design and structure of the vehicle. However, he also has his technique and if you move often on two wheels you should know how to do it if you have a flat tire with no possibility of anyone helping you. In addition, as a maintenance task, with a certain frequency you should change the tires of your vehicle due to wear. In .com we explain step by step how to change the tire of a motorcycle.

• Gloves, pneumatic, purgevalves, bead breaker, brush, assembly soap, air compressor and spatula.

one

When you have the wheel removed, before removing the worn out or punctured tire of your motorcycle, you must open the valve so that all the air that may remain inside is removed. For this you will need to use a tool called a valve purge that you must screw to the valve. When you no longer hear air coming out, it is time to remove it.

two

In the next step you will need another tool, the bead breaker, to separate the edge of the tire from the tire. You must travel the entire circumference until you can take off the entire wheel that you are going to change from the bike.

3

When you have the entire tire separated from the tire, it is time to remove it. You will need to do enough strength, so put yourself in a position where you are comfortable and that allows you to exert a lot of pressure outward.

4

Now, remove the old wheel to take it to a recycling point. The tires can be used to make recycled wheels, asphalt or rubber tires so do not throw it away directly as it may still have use.

5

Take the new tire of your motorcycle and place it in the old place. Look if there is any indicator of direction of travel, since some tires have it. Apply, with a brush, a mounting soap in the interior area to make placement easier. When you have it completely in place, you must use the tool you used to take off the old tire of the tire to perform the opposite process: that the new rubber is well secured.

6

After giving a little air to the new tire with an air compressor, use a spatula to make the tire well stuck to the rim. Then, inflate the wheel to be able to circulate. We insist that changing the tire of the motorcycle is a maintenance operation more than you have to do with certain frequency to guarantee your safety.

• The operation is not very difficult but if you do not feel safe it is preferable that you go to a workshop. The wheel is the only contact you have with the road, so it is very important that it is well placed.
• The operation is not very difficult but if you do not feel safe it is preferable that you go to a workshop. The wheel is the only contact you have with the road, so it is very important that it is well placed.